Windows, supplied and fitted in Nottingham.

Our main work is insulation and retrofit, and windows have long been part of it. A new window only performs as well as the way it is fitted into the wall, which is the part we know best.

We supply and fit aluminium windows by Origin, uPVC flush casements by The Residence Collection and our own engineered timber range, as part of a wider project or on their own.

A cream flush casement window open over a window seat

Aluminium, uPVC and timber, from a single window to the whole house

Why does an insulation company fit windows?

  • Frames set in line with the wall insulation, existing or planned, so the reveal does not become a cold spot
  • Airtight seals and membranes around the frame, which is where most draughts get in
  • Double or triple glazing specified for the house, rather than one option for every job
  • Ventilation considered from the start, with trickle vents where the room needs them
  • Old frames removed and taken away, with reveals and sills made good
  • One team for windows and insulation, so the two can be planned together now or later

Three materials, one standard of fitting

We supply aluminium, uPVC and timber windows. Each suits different houses and budgets, and we will tell you plainly which we think fits yours.

Aluminium

Origin

Slim, strong frames with a powder coated finish in almost any colour. A good match for modern homes, extensions and larger openings.

uPVC

The Residence Collection

Flush casements that follow the lines of a traditional timber window, with the low upkeep of uPVC. Well suited to period and character homes.

Timber

Our timber collection

Engineered timber sash and casement windows, made to our own thermal specification and sourced direct from a specialist mill.

Aluminium windows by Origin

Thermal performance

U-values down to 1.2 W/m²K on the slimline OW70 system, and down to 0.8 W/m²K on OW80 with triple glazing

Sightlines

From 65mm on OW70, for a frame that barely shows

Finish

Over 150 RAL colours, including textured finishes and a different colour inside and out

Security

Multi-point locking, tested to PAS 24 and accredited to Secured by Design

Guarantee

Manufacturer guarantee of up to 20 years

A woodgrain uPVC flush casement window above a bathroom basin
A Residence flush casement. Image: The Residence Collection.

uPVC flush casements by The Residence Collection

Ranges

R9 for a traditional timber look, R7 for a cleaner modern flush profile, and R2 for square, contemporary lines

Thermal performance

Up to an A+ energy rating, with U-values down to 0.8 W/m²K depending on the glazing

Finish

Woodgrain and heritage colours, with period style window furniture

Upkeep

No painting or sanding, and no swelling or sticking with the seasons

Our timber collection, direct from the mill

Our background is insulation, so we know where a timber window loses heat and how it lets draughts in. Rather than choose from a retail catalogue, we source our wood windows directly from a specialist mill, made to our own technical and thermal specification.

Going direct keeps the quality where we want it and the price competitive, because there is no retail markup between the mill and your house.

A rendered cottage with white casement windows and French doors opening onto a garden

Modern performance with traditional aesthetics

Multi-layered engineered timber

Made from multi-layered, engineered wood sections. This removes natural knots, stops the frame warping or sticking, and gives a reliably airtight seal against draughts.

Natural thermal performance

Select, close-grain timbers that act as a natural thermal barrier, keeping heat inside the home far better than standard materials.

High-performance glazing profiles

Sturdy frame profiles engineered to take advanced, energy efficient double or triple glazing.

British standards

Built to traditional British heritage standards, for sash and casement styles that sit naturally in older houses.

How a window project runs

Step one

Survey

We visit, measure every opening and look at the walls, reveals and sills around them. It is also when we talk through styles, materials and how the rooms are used.

Step two

Specification

You get a written quote setting out the material, glazing, colour, hardware and ventilation for each window, so you know exactly what is being made.

Step three

Manufacture

Every window is made to measure. Lead times vary by material and we confirm yours with the order, so the fitting date can be planned around you.

Step four

Fitting

We take out the old frames, fit and seal the new ones, make good the reveals and take the waste away. Most houses have their openings closed up again the same day.

Frequently Asked Questions

Yes. Windows are often part of a wider insulation or retrofit project, but we are just as happy to replace windows on their own, from a single opening to the whole house.

It depends on the age and style of the house, any planning restrictions and your budget. Aluminium suits modern homes and large openings, uPVC flush casements suit period homes where low upkeep matters, and timber suits heritage properties or anyone who wants a natural material. We will give you an honest view at the survey.

Modern double glazing performs well in most houses. Triple glazing is worth considering where the walls are already well insulated, on north facing rooms, or near a busy road for the extra sound reduction. All three of our ranges can take either.

Not if ventilation is planned in. Replacing draughty windows with airtight ones reduces the uncontrolled air flow that older houses rely on, so we check how each room is ventilated and add trickle vents or other measures where needed. Our ventilation page explains more.

Either, as long as the position is planned. If external wall insulation is on the cards, we can set the new frames forward so they line up with it later, which avoids cold reveals and a second round of disruption.

Spread the cost over months, or over years.

Carry out essential home improvements with one of our finance plans, choosing between interest-free credit spread over 12 months on orders up to £70,000 or fixed-rate finance over three to five years. Applications go through Ideal4Finance, with full details provided before you commit.

Ready to make your home warmer, more efficient, and cheaper to run?

Mike, our managing director, still attends the first visit on every enquiry. He will tell you openly what your home actually needs, in what order, and roughly what it costs.

Book a free home visit Call 0115 870 0831

No obligation, no sales pitch, no charge

Call us Book a visit