“The same corner goes black every winter.”
Black mould in the same corner every winter, water on the windows in the morning, a damp patch that comes back after it has been painted over. These all have a cause, and it is rarely the one the last person told you. We find it before we quote for anything.

We identify the source of the moisture before we quote.
Most damp in Nottingham's older houses is condensation. Warm, moist air from cooking, showers and drying washing settles on the coldest surfaces and the mould follows. The answer is a surface that stays warmer and ventilation that moves the moisture out, often with insulation on the cold wall so it stops attracting it.
Rising damp and penetrating damp are rarer and look different: a tide mark near the floor, or a patch that gets worse in heavy rain. We also see a lot of damp caused by insulation that was fitted badly, trapping moisture where it cannot escape. Each needs a different fix, which is why the survey comes before the quote.
We identify the source of the moisture before we quote.
A damp patch has one of a handful of causes, and the wrong treatment wastes money and sometimes makes it worse. Our survey works from the outside in, so nothing gets painted over.
Outside, all the way round
Gutters, downpipes, pointing, render and ground levels. A blocked gutter or a path built up above the damp course explains more damp patches than anything else, and costs the least to put right.
Moisture readings, in a pattern
We take readings across the wall, not just on the patch, so we can see the shape of the problem. Rising damp, penetrating damp and condensation each leave a different pattern.
Inside the structure where needed
Where the readings do not settle it, we look behind the surface: under the floor, into the cavity if there is one, or behind existing insulation to find where the moisture is being trapped.
How the air moves through the house
Extractor fans that do not extract, trickle vents painted shut, a loft hatch that leaks warm air. Ventilation is checked last because it decides whether the fix will last.
Mould is a thermal map of your house, drawn in black.
Mould grows where the surface is coldest, so it shows you exactly where the insulation is missing or bridged: the corner where two outside walls meet, the reveal around a window, the edge of a ceiling under an uninsulated loft. Read it that way and the fix becomes obvious.
Cleaning it off treats the symptom for a season. Warming the surface and moving the moisture out of the house treats the cause, and that is what we quote for.
Spread the cost over months, or over years.
Interest free credit over 12 months on orders up to £70,000, or fixed rate finance over three to five years. Applications go through Ideal4Finance, and you will see the full figures before you commit to anything.